Mosquito Swipers unique mosquito misting system provides quick and effective control of mosquitoes and other biting and stinging insects without mosquito traps or messy, unpleasant mosquito repellants.

Gen III The Gen III is a patented, state-of-the-art, tankless outdoor mosquito misting system offering superior mosquito control. The mosquito misting system is small, lightweight, and can easily be placed anywhere convenient to a hose bib and electrical outlet.

Each time the system is activated, Gen III precisely mixes a fresh batch of botanical insecticide and the smart cap on the cartridge determines the proper amount to dispense for your mosquito control needs. With Gen III’s smart cap technology, you control mosquitoes and other biting insects while using the least amount of insecticide.

Gen III is the only mosquito misting system on the market that can detect a leak in the nozzle circuit. If a leak is detected, the Gen III will suspend future mosquito mist cycles until the leak is fixed, saving you money on wasted insecticide.

The Controller The controller is the brain of the mosquito mist system. A digital display with easy to use buttons is housed inside a waterproof enclosure to allow you to set, reset, or confirm the timing and duration of mosquito mist cycles.

A backup battery protects the settings if the power is interrupted, and a panel door lock controls access. A remote control allows you to mist in between scheduled mist cycles or to turn the system off from up to 300 feet away.

Nozzle Circuit The nozzle circuit consists of our precision-engineered nozzles connected to nylon tubing installed around the perimeter of the area to be protected. The mosquito mist pattern is conical in shape and protects up to 10 feet from the nozzle tip. Nozzles are typically placed 10 to 15 feet apart to ensure full coverage.

The nozzle tips are made of a high-quality metal and weather well and are designed to yield a very fine droplet size at operating pressure. To prevent the insecticide from breaking down in ultraviolet light, black tubing is used in places where it will be exposed to sunlight. Clear or colored tubing may be used when it is not directly exposed to sunlight.

• Agitator - The optional agitator on a drum system mixes the solution prior to each mist. The insecticide tends to settle unless it is agitated. The agitator keeps the insecticide from separating, allowing a consistent blend with each mist.
• Zoning Kit: The optional zoning kit helps manage large operations with two separate nozzle circuits.
• Wind Sensor: The optional wind sensor checks the wind speed several times prior to a scheduled mosquito mist cycle. If the wind is above a predetermined speed, the wind sensor will suspend that mist cycle and begin checking again prior to the next scheduled mosquito mist cycle.